100 years providing
electrothermal solutions

Call us at (0034) 935 860 045

FAQ's

Introduction


New request

What are the spiral electric heating elements?

The spiral electric heating elements consist of cylindrical spirals formed by one or two resistance wires of suitable alloy for the application...


What are the characteristics of curved electric heating elements for ovens?

The curved electric heating elements for ovens are formed by a wire or ribbon of appropriate alloy formed for suspension in refractories or stapling...


What are the applications of electric heating elements like single-circuit heating elements with threaded plug?

The electric heating elements for immersion of single-circuit heating elements with threaded plug consist of one tubular element of nickelplated...


What are the characteristics of electric heating elements like low and medium intensity cartridges?

Are shielded tubular heating elements with both terminals at the same end. They are made of brass or of stainless steel. The usual applications are:...


Where you can use clamp heating elements?

The clamp heating elements are shielded elements with mica for clamping on any type of duct or vessel, whether round, quadrangular or rectangular. It...


What are the applications of triple-circuit electric heating elements with threaded plug for immersion?

The electric heating elements for immersion are designed to heat in direct contact with the fluid: water, oil, viscous materials, etc.
It...


What are the applications of electric heating elements with plates?

The electric heating elements with plates are fixed anchorage elements for immersion with tightening plates for sealing of tank. Materials suitable...


Where you can use electric heating elements with connectors?

Electric heating elements with connectors are designed for fixed installation inside of vessels. Shielded elements with connectors welded on their...


What are the features of “Barnacle” heating elements?

Electric heating elements with triangular profile or pressed inside of metallic masses to heat flat bottoms or sides or tanks.

...


What are the applications of “Barnacle” heating elements?

“Barnacle” heating elements are designed for heating by external contact of tanks of mould heating, lead and tin baths, drying of solids,...


What are the features of electric heating elements with hermetic nozzles?

Hermetic brass clamps for plastics injection nozzles. Connections protected with mesh of 250 mm in length.


What are the features of flexible electric heating elements insulated with fiber glass?

Flexible electric heating elements insulated with fiber glass have high mechanical resistance and many applications, such as: heating of pipes...


What are the features of electric heating elements for electric boilers?

Electric heating elements for electric boilers consist in stainless steel plates with six shielded cooper tubular elements; the whole assembly is nickel-plated...


Are flexible silicone electric heating elements waterproof?

Flexible silicone electric heating elements are insulated with silicone elastomer that makes them waterproof.


What is the maximum temperature that can support flexible silicone electric heating elements?

Flexible silicone electric heating elements can support 250 ºC.


Which are the advantages of flanged heater 8 meters long?

Flanged heater 8 meters long allows heating and maintaining temperature of the important volumes. Furthermore this type of heater can be made according...


What are the applications of flanged heater 8 meters long?

They are normally installed in reactors, tanks, and reheaters or circulation heaters among others.


What are the main features of heating elements for hot air guns?

The features are:
Spirals formed by resistance wires of Ni-Cr alloy

What are the applications of electric heating elements for hot air guns?

The main applications are:

• Hot air blowers
• Industrial dryers
• Electric...


Which are the characteristics of heating elements in compressors?

Heating elements in compressors are suitable in round tanks too.
The features are:
Heating...


What types of seal are used in electric heating elements?

We use five types of seal according to Electricfor's constructive thermic class to protect against humidity penetrating the heating elements:

What is the maximum temperature in electric heating elements with airtight seal?

Sheath and seal temperature should not exceed 300ºC and 150ºC respectively. If the sheath temperature exceeds 300ºC or the seal temperature...